V2FCT – 100 % fibreglass two-section manually extended ladder
Maximum height 8.25 m
For professional use
European standard EN 131
European standard EN 131. Indicates compliance with the European technical standard requiring high quality in dimensions and strength.
EN61478
EN61478. Indicates that the product has been independently tested and certified under the European standard for dielectric properties at high voltage (30,000 volts).
2-year warranty
Indicates that the product has a 2-year warranty against manufacturing defects.
Capacity 150kg
The product's maximum total load capacity is 150 kg.
They are built with both rungs and fiberglass uprights.
- Sliding wheels on the wall from 10 rungs
- Anti-slip hook
- Last 3 red safety rungs (not walkable). The operator must remain with his feet under the red rungs.
- Basic Spreader Stabilizer (Standard)
- 30 mm non-slip pegs / Distance between rungs 28 cm.
- Use and maintenance manual.
- Identification label.
- Upright profile 70x28 mm
- Antimagnetic and resistant to moisture, acids, corrosion and ultraviolet rays.
- Screws and metal parts in stainless steel.
- Yellow belt to support the pole (optional)
- Hooks (optional)
| Model | Number of rungs | Folded height m | Extended ladder height m | Weight kg | |
| FIBRAFCT06 | 2X6 | 1.89 | 2.65 | 14 | Inquiry |
| FIBRAFCT07 | 2X7 | 2.17 | 3.21 | 15.5 | Inquiry |
| FIBRAFCT08 | 2X8 | 2.45 | 3.77 | 17 | Inquiry |
| FIBRAFCT09 | 2X9 | 2.73 | 4.33 | 18.5 | Inquiry |
| FIBRAFCT10 | 2X10 | 3.01 | 4.89 | 21 | Inquiry |
| FIBRAFCT11 | 2X11 | 3.29 | 5.45 | 22 | Inquiry |
| FIBRAFCT12 | 2X12 | 3.57 | 6.01 | 24 | Inquiry |
| FIBRAFCT13 | 2X13 | 3.85 | 6.57 | 25 | Inquiry |
| FIBRAFCT14 | 2X14 | 4.13 | 7.13 | 27 | Inquiry |
| FIBRAFCT15 | 2X15 | 4.41 | 7.69 | 35 | Inquiry |
| FIBRAFCT16 | 2X16 | 4.69 | 8.25 | 38 | Inquiry |
REGULATIONS
V2FCT is a ladder series successfully tested to the following standards:
- EN 131-1: 2015+A1:2019 + A2:2025
- EN 131-2: 2010 + A1:2012 + A2:2017 + A3:2025
- EN 131-3: 2018 + A1:2025
Insulating ladder for electrical work – Tested according to EN 61478 up to 30 kV.
Designed for professional applications in the electrical sector, this insulating ladder has passed the tests required by the EN 61478 standard (Live working – Ladders of insulating material), according to the requirements and test conditions applicable up to 30 kV, as documented by the relevant test reports.
EN 61478 is specifically dedicated to ladders made of insulating material intended to facilitate access when working on live electrical systems.
Passing the documented tests attests to the verified performance of the product under the specific test conditions envisaged.
The ladder is intended only for qualified personnel, trained in electrical work, and must be used in compliance with safety procedures, the manufacturer's instructions and the intended operating conditions.
Compliance with EN 61478 tests: documented by test report.
Declared test level: up to 30 kV, within the limits and according to the methods indicated in the technical documentation of the product.
The product may only be used near low-voltage electrical installations.
Technical configurations
Compare the listed dimensions and specifications for each configuration.
| Model | Steps number | Closed height m | Extended ladder height m | Weight kg | Inquiry |
|---|---|---|---|---|---|
| FIBRAFCT06 | 2X6 | 1.89 | 2.65 | 14 | FIBRAFCT06 |
| FIBRAFCT07 | 2X7 | 2.17 | 3.21 | 15.5 | FIBRAFCT07 |
| FIBRAFCT08 | 2X8 | 2.45 | 3.77 | 17 | FIBRAFCT08 |
| FIBRAFCT09 | 2X9 | 2.73 | 4.33 | 18.5 | FIBRAFCT09 |
| FIBRAFCT10 | 2X10 | 3.01 | 4.89 | 21 | FIBRAFCT10 |
| FIBRAFCT11 | 2X11 | 3.29 | 5.45 | 22 | FIBRAFCT11 |
| FIBRAFCT12 | 2X12 | 3.57 | 6.01 | 24 | FIBRAFCT12 |
| FIBRAFCT13 | 2X13 | 3.85 | 6.57 | 25 | FIBRAFCT13 |
| FIBRAFCT14 | 2X14 | 4.13 | 7.13 | 27 | FIBRAFCT14 |
| FIBRAFCT15 | 2X15 | 4.41 | 7.69 | 35 | FIBRAFCT15 |
| FIBRAFCT16 | 2X16 | 4.69 | 8.25 | 38 | FIBRAFCT16 |
Interested in this product? Send an inquiry for a quotation, availability or help choosing.