Skip to content
SVELT Serbia
Serbia · RS
SVELT

V2FC – 100 % fibreglass two-section rope-operated ladder

Ladder with 2-section rope 100% in dielectric fiberglass (uprights/rungs) only leaning against the wall for applications in electrical, food, chemical, brackish environments.

Maximum height 9.93 m

For professional use

European standard EN 131

European standard EN 131. Indicates compliance with the European technical standard requiring high quality in dimensions and strength.

EN61478

EN61478. Indicates that the product has been independently tested and certified under the European standard for dielectric properties at high voltage (30,000 volts).

2-year warranty

Indicates that the product has a 2-year warranty against manufacturing defects.

Capacity 150kg

The product's maximum total load capacity is 150 kg.

V2FC is 100% FIBERGLASS (UPRIGHTS AND RUNGS)
It is a series of professional ladders with 2 trunks that can be used with extension with a rope (only leaning against the wall).
They are built with both rungs and fiberglass uprights.
They are suitable for operators who are working near cables, sockets or other sources of electricity.
Also suitable for special uses in areas with high electrical or food or chemical hazards where aluminium cannot enter.
 
DOTAZIONI STANDARD
  • Scroll wheels on the wall
Product view: V2FC – 100 % fibreglass two-section rope-operated ladder
  • Anti-slip hook
 
Product view: V2FC – 100 % fibreglass two-section rope-operated ladder
 
 
  • Base stabiliser
Product view: V2FC – 100 % fibreglass two-section rope-operated ladder

 

 

 

  • Rope with pop-up and pulley

 

Product view: V2FC – 100 % fibreglass two-section rope-operated ladder

 

  • Last 3 red safety rungs (not walkable). The operator must remain with his feet under the red rungs.
 
Product view: V2FC – 100 % fibreglass two-section rope-operated ladder
  • 30 mm non-slip rungs. Distance between rungs: 28 cm.
 
Product view: V2FC – 100 % fibreglass two-section rope-operated ladder
  • Use and maintenance manual
  • Upright profile 70x28 mm
  • Identification label
  • Antimagnetic and resistant to moisture, acids, corrosion and ultraviolet rays.
  • Screws and metal parts in stainless steel.

     

ON REQUEST (all accessories must be ordered with the ladder)
  • Yellow belt to support the pole (optional)
 
Product view: V2FC – 100 % fibreglass two-section rope-operated ladder
 
 
  • Adjustable telescopic legs (optional)
 
Product view: V2FC – 100 % fibreglass two-section rope-operated ladder

 

 

ECHNICAL FEATURES
ModelNumber of rungsFolded height mExtended ladder height mUpright profile mmWeight kg
FIBRAFC102X10

3.01

4.89

70x28 mm

24

Inquiry
FIBRAFC112X11

3.29

5.45

70x28 mm

25.5

Inquiry
FIBRAFC122X12

3.57

6.01

70x28 mm

27

Inquiry
FIBRAFC132X13

3.85

6.57

70x28 mm

28.5

Inquiry
FIBRAFC142X14

4.13

7.13

70x28 mm

30

Inquiry
FIBRAFC152X15

4.41

7.69

82x32

38

Inquiry
FIBRAFC162X16

4.69

8.25

82x32

40

Inquiry
FIBRAFC172X17

4.97

8.81

82x32

42

Inquiry
FIBRAFC182X18

5.25

9.37

82x32

44

Inquiry
FIBRAFC192X19

5.53

9.93

82x32

46

Inquiry
 

REGULATIONS

V2FC is a ladder series successfully tested to the following standards:

  • EN 131-1: 2015+A1:2019 + A2:2025
  • EN 131-2: 2010 + A1:2012 + A2:2017 + A3:2025
  • EN 131-3: 2018 + A1:2025

 

EUROPEAN STANDARD EN 61478 UP TO 30 kV:
  • Insulating ladder for electrical work – Tested according to EN 61478 up to 30 kV.

Designed for professional applications in the electrical sector, this insulating ladder has passed the tests required by the EN 61478 standard (Live working – Ladders of insulating material), according to the requirements and test conditions applicable up to 30 kV, as documented by the relevant test reports.

EN 61478 is specifically dedicated to ladders made of insulating material intended to facilitate access when working on live electrical systems.

Passing the documented tests attests to the verified performance of the product under the specific test conditions envisaged.

The ladder is intended only for qualified personnel, trained in electrical work, and must be used in compliance with safety procedures, the manufacturer's instructions and the intended operating conditions.

Compliance with EN 61478 tests: documented by test report.

Declared test level: up to 30 kV, within the limits and according to the methods indicated in the technical documentation of the product.

  • The product may only be used near low-voltage electrical installations.

Technical configurations

Compare the listed dimensions and specifications for each configuration.

ModelSteps numberClosed height mExtended ladder height mUpright profile mmWeight kgInquiry
FIBRAFC102X103.014.8970x28 mm24FIBRAFC10
FIBRAFC112X113.295.4570x28 mm25.5FIBRAFC11
FIBRAFC122X123.576.0170x28 mm27FIBRAFC12
FIBRAFC132X133.856.5770x28 mm28.5FIBRAFC13
FIBRAFC142X144.137.1370x28 mm30FIBRAFC14
FIBRAFC152X154.417.6982x3238FIBRAFC15
FIBRAFC162X164.698.2582x3240FIBRAFC16
FIBRAFC172X174.978.8182x3242FIBRAFC17
FIBRAFC182X185.259.3782x3244FIBRAFC18
FIBRAFC192X195.539.9382x3246FIBRAFC19

Interested in this product? Send an inquiry for a quotation, availability or help choosing.