Express 200 S – glass lift

Glass sheet lifter and conveyor with mechanical operation with manual elevation.

• Maximum height of suction cups in vertical position (upper suction cup center) mm 2750
• Maximum height of suction cups in horizontal position (cup centre) mm 1950
• Minimum height of suction cups in horizontal position (cup centre) mm 760
• Diameter of suction cups 300 mm (H-frame suction cups 250 mm)

• Manual drive controls with single crank winch
• 360° slab rotation device
• Vertical and horizontal millimetric adjustment device to center the glass in the seat in the window
• Robust elevation column with controlled bending
• Labels and use and maintenance manual
• Test certificate according to Italian and European regulations (CE)
• Telescopic boom with eyebolt for crane or overhead crane
• Machine net weight Kg 113.8
• Weight of components to be transported on the van: (base Kg 41.2) (column Kg 49.8) (drawbar Kg 22.8)
• Packaging dimensions (case): 1956x533x483
• Total gross weight (including case): 120 Kg
• Maximum lifting capacity of 200 kg.
• It allows you to rotate glass with a maximum length of 3660 mm.
• Adjustment system such as to allow the insertion of the glass both laterally and from above in the seats of the window.
• 330mm pneumatic wheels for traveling on rough terrain typical of construction sites.
• Adjustable wheel axle from 70 cm to 80 cm depending on the aisle or space available for transport.
• 360° rotation of the sheet to pass through doors and corridors

• Lateral millimeter translation device

• H-frame with 2 additional suction cups (diam. 250 mm) with lifting ring with crane

• H-frame with electric pump with eyebolt for crane lifting (the 2 suction cups in the machine kit are used)
• H-shaped frame with electric pump with eyebolt for crane lifting + 2 additional suction cups (diam. 250 mm) (4 total because the 2 suction cups are used in the machine kit.

• H-frame with electric pump with lifting eyebolt with crane + 4 suction cups (if you do not already have an EXPRESS)

• Mini-slab kit: for mounting glass balustrades (height from the ground 400 mm) (see video)

  (Express' balustrade kit allows you to handle small slabs by raising the axis for fixing the suction cups on the slab starting from the ground.

The blue arm of the kit can in fact be positioned in such a way as to facilitate lifting from the ground and keep the slab suspended to carry out the assembly of the

hinges and the positioning of the slab in position. Without this kit the standard arm would be too high compared to the centerline of the small slab

making it difficult to rotate and lift.

• Window mounting frame