Skip to content
SVELT Serbia
Serbia · RS
SVELT

Access at height and to roofs with SVELT mobile scaffold towers

Content from SVELT.

Need help choosing a solution? Describe the required height, intended use and installation space. We will help you choose the appropriate product and documentation.

IS IT POSSIBLE TO USE THE SCAFFOLD AS A ROOF ACCE SYSTEM?
If there is no other way to access it, yes!
 
The scaffolding must be produced and certified in compliance with the local standards.
It must have locked wheels (with brakes) and must be anchored to the facade every 2 floors
We remind you that the European standard UNIEN1004 2019 explicitly prohibits to use the scaffolding for disembarking and for roof access.
For this reason, the only law applicable is the local standard of every country if these standards allow the roof access with scaffoldings.
 
Many of our professional scaffolding are designed to allow the operator to land on another surface. This use is foreseen in the use and maintenance manuals which describe everything that must be done for the safety of the operator.
 
IMPORTANT MEASURES
  • Maximum distance between the landing point on the roof and the platform surface must be less than or equal to 200 mm
  • Maximum height between the landing point on the roof and the platform surface must be less than or equal to 150 mm
 
COMPONENTS
  • The point of disembarkation of the scaffolding must be free from obstacles (therefore only at the point of disembarkation the crossbars, crossbeams, parapets and toeboards must be removed).
  • For each model, check from the user manual whether any components must be added to maintain the overall rigidity of the protective railing.
  • It is not mandatory to protect the landing point with a gate

Technical information on this page

Kaj preveriti pred izbiro dostopa na streho

Izbrani oder mora biti predviden za takšno uporabo v navodilih proizvajalca in dopusten po pravilih, ki veljajo na mestu uporabe. Objavljeni prispevek proizvajalca navaja UNIEN1004 2019 in ločuje običajen pomični delovni oder od dostopnega sistema. Sama oznaka EN 1004 zato ne pomeni dovoljenja za izstop na streho.

Razdalji pri izstopu

  • Vodoravna razdalja med ploščadjo in mestom izstopa: največ 200 mm.
  • Višinska razlika med ploščadjo in mestom izstopa: največ 150 mm.
  • Prispevek navaja blokirana kolesa in sidranje v fasado vsaki 2 etaži. Za dejansko konfiguracijo veljajo navodila konkretnega sistema.

Različni sistemi in standardi

  • Prikazana dokumentacija razlikuje dostopni stolp z mostičkom, notranje stopnišče v stolpu, prislonjeno servisno stopnišče ter servisno stopnišče na premičnem delovnem stolpu.
  • EN 12810: fasadni odri iz predizdelanih elementov. EN 12811: začasna oprema za delo na gradbišču. EN 1004: premični dostopni in delovni stolpi iz predizdelanih elementov.
  • Standardizirana zasnova in certifikat o skladnosti z referenčnimi zahtevami sta različna podatka; preveriti je treba ustreznost dokumentacije za izbrano sestavo in uporabo.

Kako brati prikazano oznako stolpa

Primer iz dokumentacije »TORRE EN 1004 2 8/12 ABXX« navaja uporabljeni standard, razred enakomerno porazdeljene obtežbe, največjo višino za zunanjo/notranjo uporabo ter vrsto dostopa. Vrednosti 8/12 v tem primeru niso splošno dovoljene višine vseh odrov.

Pojasnilo španskega gradiva o načrtu montaže

Španski prikaz PMUD (načrt montaže, uporabe in demontaže) navaja odra iz predizdelanih elementov nad 6 m, premostitve oziroma razmake opor nad 8 m, postavitev na višjih konstrukcijah z navpičnim tveganjem padca nad 24 m ter premične dostopne/delovne stolpe pri delu nad 6 m. Navaja tudi pogoje, ko načrt lahko nadomestijo navodila proizvajalca: ustrezen certifikat, tipska sestava in dovoljena uporaba, dopolnjeni glede na mesto postavitve. To je prikaz zahtev španskega dokumenta, ne določitev slovenskih zakonskih pragov.

Need help choosing a solution? Describe the required height, intended use and installation space. We will help you choose the appropriate product and documentation.